The Limitorque Pneumatic Scotch Yoke (LPS) Heavy-Duty Actuator is designed to meet the industry’s most recent and stringent safety and performance standards for oil and gas applications. With a maximum allowable working pressure of 12 barg (174 psig), the Scotch yoke actuator provides up to 250 kNm (184 000 ft-lb) of precisely controlled torque.
The Limitorque LPS pneumatic actuator is ideal for any application where a robust design, long service life and high-speed operation are required. Among the most important benefits of this product:
Industry-leading, 25-year design life, depending on service conditions, proper installation, operation and maintenance
Maintenance intervals up to six years or as prescribed in EN 15714 endurance testing
Warranty terms over and above typical industry standards
12 barg (174 psig) maximum allowable working pressure
Quick stroking times — less than 0.5 seconds
Up to 250 kNm (184 000 ft-lb) of torque
NOTE: For sizes up to 800 kNm (590 000 ft-lb), consult factory.
-60°C (-76°F) to 160°C (320°F) operating temperature range
Newly developed controls packages for precise torque control and safety functionality
Product Features
Heavy-duty design features a robust construction with high-strength materials that deliver maximum force while minimizing localized stresses. The LPS is designed for a maximum allowable working pressure of 12 barg
(174 psig), as standard for operation across a full range of applications. Its low displacement design reduces operation and controls package costs. The actuator is available in single-acting spring return and double-acting configurations.
Reliable, compact, high-cycle yoke design minimizes transverse loads. A symmetrical yoke is standard, and a canted yoke is available optionally. The torque module includes numerous heavy-duty features, including:
Maximized valve bore and a closed-yoke design
Guide block for directional alignment of linear forces, transfer of side loads to the guide bar, and transfer of torque to the yoke
Slider block with optimized surface areas for long life, minimal wear and increased efficiency
High-strength yoke pin for maximum torque transfer while minimizing wear and localized stresses
Rapid emergency response in less than 0.5 seconds achieved through optimized design. The LPS is designed with emphasis on ever-increasing requirements for ultra-fast response. The result is the smallest possible displacement volume for given torque outputs, resulting in the fastest possible cylinder exhaust — ideal for emergency applications (ESD or HIPPS).
Standard and custom controls packages are available for myriad applications.
Certifications and Approvals
The LPS actuator is designed to meet industry standards and customer acceptance criteria that define today’s performance and safety requirements for pneumatic actuators. Critical certifications, approvals and standards to which the LPS has been tested are listed here.
Designed and manufactured in accordance with:
EN 60529
EN 13906-1
EN 15714-3
IEC 60079-0
IEC 60721-2-1
IEC 61508
ISO 9001
ISO 5211
ISO 5599
ISO 12490
ISO 12944-2
SIL 3
For information regarding product compliance for ATEX, PED, ASME, SIL and GOST, please contact:
+39 039 62060 200.
Environmental
Corrosion resistance in accordance with EN15714-3:C5-1/C5-M (or as specified)
在線客服
企業(yè)微信
點(diǎn)擊圖片查看原圖
[VIP第3年] 指數(shù):4
通過認(rèn)證 
