SHINKO神港通信單元SIF-400

 SIF-400
[特點]
·PLC和溫度控制器DCL-33A或JC□-33A連接專用單元

IF-400 新款 IF-600 通信變換器
本器は，ホストコンピュータまたはPLC(RS-232CまたはRS-422)と調節計(シリアル通信機能RS-485  [オプション: C5])との通信を仲介する通信変換器です。 弊社標準プロトコルおよびModbusプロトコルに対応しています。 また，調節計側通信ラインに本器を接続すると，リピータとして使用できます。 リピータが 31 臺目の接続機器となり，リピータの調節計側にさらに*大 31 臺の調節計を接続できます。  リピータは*大 3 臺接続でき，調節計のアドレス數制限 95 臺まで接続できます。
本器をリピータとして使用すると，調節計を32臺以上接続できます。
また，通信ラインを1.2km以上延長できます。
リピータは*大3臺，調節計はアドレス數制限95臺まで接続できます。(通信ラインは*大4.8km)

[特點]
·一個在控制器（RS-485）與主機（RS-232C或RS-422A）之間的通信轉送/轉換器
串行通信 主機與IF400間：RS-232C/RS-422A/RS-485標準
通信速度 通信速度可以通過增加或減少鍵來選擇2400,4800,9600,19200BT 按MODE鍵確認
（IF-400)-(溫度調節儀間通訊）
串行通信 RS-485標準
電源電壓 100-240V AC 50/60HZ
安裝方式 軌道安裝式軌道
外形尺寸 22.5（W)*75(H)*100(D)MM

Preface
Thank you for purchasing our SIF-600, PLC interface unit.
This manual contains instructions for the mounting, functions, operations and notes when operating the
SIF-600. To ensure safe and correct use, thoroughly read and understand this manual before using this
instrument. To prevent accidents arising from the misuse of this instrument, please ensure the operator
receives this manual.
Notes
 This instrument should be used in accordance with the specifications described in the manual.
If it is not used according to the specifications, it may malfunction or cause a fire.
 Be sure to follow all of the warnings, cautions and notices. If they are not observed, serious injury or
malfunction may occur.
 The contents of this instruction manual are subject to change without notice.
 Care has been taken to assure that the contents of this instruction manual are correct, but if there are any
doubts, mistakes or questions, please inform our sales department.
 This instrument is designed to be installed on a DIN rail within a control panel. If it is not, measures must be
taken to ensure that the operator cannot touch power terminals or other high voltage sections.
 Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
 Shinko Technos CO., LTD. is not liable for any damage or secondary damage(s) incurred as a result of using
this product, including any indirect damage.
Safety Precautions (Be sure to read these precautions before using our products.)
The safety precautions are classified into 2 categories: “Warning” and “Caution”.
Depending on the circumstances, procedures indicated by Caution may cause serious results, so be sure
to follow the directions for usage.
Warning
Procedures which may lead to dangerous conditions and cause death or serious injury, if not carried
out properly.
Procedures which may lead to dangerous conditions and cause superficial to medium injury or physical
damage or may degrade or damage the product, if not carried out properly.